Bosch Compact Laser Distance Measure, 120-Feet GLM 35

https://www.amazon.com/dp/B00VI7WBWE/ref=cm_sw_r_cp_api_zdJVBbB3ZZKB​5

Posted by 호랭이~

Samsung Galaxy Note9 Unlocked Phone, 512GB (U.S. Warranty) with a FREE Samsung S3 Frontier Smartwatch

https://www.amazon.com/dp/B07HZXVBM5/ref=cm_sw_r_cp_api_L9IVBbXQ1W3VT

Posted by 호랭이~

Raid Controller 정보 조회 방법

MegaCli (Dell, IBM, Etc...)

# MegaCli -AdpAllInfo -aALL

# MegaCli -LDInfo -Lall -aALL

# MegaCli -PDList -aALL

# MegaCli -CfgDsply -aALL

# MegaCli -adpeventlog -getevents -f lsi-events.log -a0 -nolog

 

HPacucli (HP)

# hpacucli ctrl all show config

 

 

Posted by 호랭이~

[root@v3w210 ~]# fdisk -u /dev/xvdb;
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.


The number of cylinders for this disk is set to 5221.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First sector (63-83886079, default 63):
Using default value 63
Last sector or +size or +sizeM or +sizeK (63-83886079, default 83886079):
Using default value 83886079

Command (m for help): t
Selected partition 1
Hex code (type L to list codes): 8e
Changed system type of partition 1 to 8e (Linux LVM)

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.


mkfs.ext3 /dev/xvdb1;
pvcreate /dev/xvdb1;
vgs;
vgextend VolGroup00 /dev/xvdb1;
lvextend -l +100%FREE /dev/mapper/VolGroup00-LogVol00;
df -h;
resize2fs /dev/mapper/VolGroup00-LogVol00;
df -h;


reboot

Posted by 호랭이~

CentOS 5 / Centos 6 기준


[root@linux]# cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE="bond0"
BOOTPROTO="static"
BROADCAST="XXX.XXX.XXX.XXX"
GATEWAY="XXX.XXX.XXX.XXX"
IPADDR="XXX.XXX.XXX.XXX"
NETMASK="XXX.XXX.XXX.XXX"
ONBOOT="yes"
TYPE="BOND"


[root@linux]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="none"
HWADDR="XX:XX:XX:XX:XX:XX"
ONBOOT="yes"
TYPE="Ethernet"
USERCTL="no"
MASTER="bond0"
SLAVE="yes"


[root@linux]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE="eth1"
BOOTPROTO="none"
HWADDR="XX:XX:XX:XX:XX:XX"
ONBOOT="yes"
TYPE="Ethernet"
USERCTL="no"
MASTER="bond0"
SLAVE="yes"


[root@linux]# cat /etc/modprobe.d/bonding.conf
alias bond0 bonding
options bond0 mode=1 miimon=100

본딩옵션


[root@linux]# cat /etc/sysconfig/network
~~~~기존설정~~~~
GATEWAYDEV=bond0


#modprobe bonding

#service network restart








Posted by 호랭이~